It seems like a long time since I worked on the trailer, in reality, it’s only been a couple weeks. I’ve decided that the goal of making Camp Dearborn and the Tin Can Tourist Spring Rally isn’t going to happen, so I’ve slowed down a bit, but I’ve still gotten quite a bit done.
The new axle is under the trailer, and the Dodge 17″ 8 lug wheels and Michelon 24575R17 10 ply rated tires are on. The trailer now looks like ours, it looks good and feels good having that chore done. In addition, both waste tanks are under the trailer and the plumbing is 90% complete, so there are three things (almost) checked off the list. Most of the trim is done inside, I have to steam and bend a couple pieces of quarter round, and cut the hole in the roof for the fridge and hot water heater vent, finally get the interior varnished, and a thousand other little jobs that I haven’t even thought of yet.
I’ve taken advantage of the lack of a rush on the trailer, to finally start organizing and working on the ’34 Ford roadster project I bought last fall after selling the ’48 Pontiac convertible. I lifted the body off the frame, and made a (sort of) frame table/jig using two Stanley Work-Mates and some steel rectangular tubing. I have the frame leveled, squared, tacked together, the engine mounts are in, and the front axle is hanging from the crossmember. I’ve started welding the center section in, and will get the ’40 Ford rear crossmember flattened and in tomorrow. At least, that’s the plan…
So, that’s what’s happening here at Cool McCool’s Garage, progress on two fronts!
Cool McCool's Garage 