The car may be cut and buff(ed), but I’m exhausted…

Posted: January 25, 2018 in Ford Roadsters, Hot Rod, transportation
Tags: , , , ,

Today’s task was to go to AutoZone and spend my Christmas money on transmission fluid, wax, hand buffing compound, tire cleaner, wheel cleaner, fuses, and other miscellaneous stuff.  (Of course I didn’t get a three prong flasher, number one on the list…).  I added 2 quarts of trans fluid, and backed it out of the garage into the (almost) sun.  IMG_3668

It was then that I could see that I wasn’t done buffing and polishing!  The paint is single stage  urethane, and has fully cured, meaning it’s pretty hard.  I wet sanded it with 1200, then 1500, then like 4,000 on my DA, which left a pretty uniform satin finish.  Then I buffed it with 3M Heavy Duty Rubbing compound and wool bonnet, washed the car, and then used a foam pad and 3M machine finish glazing compound.  If I’d done all this when the paint was still soft, lets say within a week of shooting it, it’d have been much, much easier.

IMG_3670

As it was, I had quite a few “hazy” areas, that needed a lot more polishing.  So, out came the buffer, foam pad and glazing compound, and I hit most of the car again.  I also hand rubbed the character lines, door and hood edges, as I didn’t want to cut through the black.  I’d originally planned to intentionally cut through into the red-oxide primer beneath,  to make the paint look old, but I just couldn’t bring myself to do that.

Call me crazy…

Now however, I’m very happy with the results, the paint looks deeper, and has a somewhat “softer” shine, a bit less “plasticky” than the uncut urethane.   I got supplies to detail and spiff the car for its debut at AutoRama in Detroit in one month, like tire dressing, some Meguires liquid wax, spray detailer, wheel cleaner for (very hard to clean wire wheels), Armor-All wipes for the interior and so on.

 

 

IMG_3675

I ordered some little stuff for the interior, some welting, Common Sense snaps for the saddlebag style map pockets in the doors, vinyl tack strip, and metal spring clips to hold the trim panels on, as Kim hates using screws and trim washers.  I don’t mind that, but she is right, it’ll be a more finished look.

So, it’s coming down to the wire.  The car runs GREAT, it looks as good as anything I’ve ver built, it seems to drive OK, at least up and down the drive, the brakes and steering are tight and feel really good.

See you in Detroit!

Comments
  1. Jerry Dillinger says:

    A magnificent obsession Brian. I admire both your skills and your tenacity. Rod on 🙂

    Jerry

    >

  2. Keith Vander Pol says:

    Looking fantastic! Won’t make it to Detroit. Hoping it’ll be at Gilmore’s Red Barn event this coming summer.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s