Winter project. No, not the T’bird…

Posted: March 24, 2019 in Station wagon, Uncategorized
Tags: , , , ,

img_1123

I’ve been busy this past month and half working on our son Craig and his wife Kathleen’s ’65 Ford Ranch Wagon.  Craig bought this car a year ago in Detroit, from a Craigslist ad.  It was an unfinished, apparently abandoned project, the 352 supposedly freshened up, ran great but no brakes and typical rust on the bottom edges.  The body had been off and frame repaired, very well done.  They drove the car all summer after having the brakes gone through by our friend Baron, pulling their canned ham camper,  trips to the UP, camping throughout lower Michigan, and evening runs to the A&W.  Mechanically great but definitely needing some bodywork.

56945981706__5bf62540-be6e-4d9d-855b-3f0427f3cb4eI got it in the shop in January, and started working on the body.  It’d been the victim of a “used car lot” type “repair” years ago, plastic about an inch thick that was letting go around the wheels, the dog-legs were gone, and the bottom 4″ of the tailgate were AWOL.  In fact, the left side hinge had torn loose, causing the right side hinge (die-cast) to break from the extra load.  I bought a shrinker/stretcher set from Harbor Freight,  made my own sheet metal brake from scraps of steel I had, and set to work making the dog-legs, lower quarter panels and wheel openings, and bottom of the tailgate.

img_0960

51769810_10219157839399475_5440535146581196800_n

50840141_10219024705431209_131812267141365760_n

52601916_10219223479640440_3518913228698550272_n

img_1124

I knew how much work it was going to be, the only surprise was the top of the right front fender, which had some blistered paint that turned out to be cancerous.  I’m pretty proud of the repair to that, and the wheel opening flare and dog-leg panels, all complicated compound curves and beads which I was able to make accurately with my limited tools and a sheet of 20 gauge.  From there it was a matter of grinding down what seemed to be miles of weld (which Kim helped with, holding the dolly in back of the weld while I hammer welded the joints.  Thanks Kim!) and then the rather tedious job of filling and then sanding, filling, sanding, filling, and sanding until the panels were perfect.

55704718_10219456900395813_970189513953378304_n

53405410_10219437031339099_4187879759717335040_n

54800219_10219459560382311_4785480070468730880_n

I wrapped up the bodywork today.  There’ll be some little spots I’m sure that will need a tiny bit of finessing that we’ll find as we prep for paint, but it looks really, really good.  I’m proud of the job, it was fun expanding my skill set, and very gratifying to do something for Craig and Kathleen.  The deadline for paint is the first part of May, they’ve got reservations for the Tin Can Tourist Spring Rally with us the third weekend of May, and plans for lots of fun this summer with the wagon, which will now look as good as it runs.

Comments
  1. Ronald Abner says:

    Good job.

    Sent from my iPhone

    >

  2. rob j says:

    Been there, done that! Very nice work! And a perfect vehicle to pull a “Canned Ham”.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s