I have a little space heater in the trailer, a fire in the stove in the shop, and I’ve been busy doing what I consider “cabinet work”, although I’m sure my high school shop teacher, and my brother-in-law would shake their heads in disbelief and walk away, I think I’m making progress.
Above, we have the beginnings of a lunch counter, which we had to have because we bought two of these killer bar stools right after we bought the this trailer (a ’47 Spartan Manor). Seen here in it’s first, roughed in state as a wiggly bunch of sticks, I had to take in the trailer and see if was actually going to fit and be useable.
The verdict is: Yes.
To the right of the cool bar stool is the dinette booth, which is a modified version of the one in out last Spartan. This one is longer on the curb side, and shorter on the street side (the side we see here), and will sit 4 people comfortably. I made the seats cushions of the ’46, our last Spartan, about 3″ too short in an attempt to make the booth seem “roomy”, but they were awkward and uncomfortable. This one has deeper cushions, the table will be narrower, and we’ll again have a “coffee table” option, one with shorter legs. The larger dining table will stow away behind the back of the curb side of the dinette, to be used only when we have guests for inside meals or when Milo, our grandson, stays with us. (We hope that’s often!)
Once again, we’ll have a wrap around shelf under the panoramic front windows, that’ll continue down the top of the booth to display stuff. That was one feature of the ’46 that we really liked. This should be a notable improvement over that trailers seating.
I’m waiting to get the beautiful (but slightly larger than we really want) vintage GM Frigidaire fridge (that we scavenged from the Spartanette we bought this summer, along with the Dixie stove) from the shop that’s converting it from electric to RV propane and 110V operation. This was all arranged by our good friend Mike Greene of Sierra Custom Interiors, a fellow TCT member and all around great guy. It should be done next week, then I’ll be able to build the sink and fridge cabinets, and complete the bathroom. I’d like to have the fridge on hand to assure I build things correctly, all these other things hinge on where and how the fridge will be positioned.
It’s gonna be close…
Also in the wings is the beautiful little Dixie gas range. This too was scavenged from the Spartanette before it left. It’s in great shape, although the clock lens was broken the face of the clocks graphics are peeling, and the springs which hold the oven door closed are both broken. All this stuff should be easy to fix, the stove and fridge will really set off the interior of the trailer.
The street side cabinets are framed in, with space for the stove, and the lavatory sink is in place behind the little partition between galley and bedroom. This all fits well and looks great, we’ll have a simple display shelf above the stove, no upper cabinets on this side of the galley.
Todays project, in bitter cold, was the wardrobe cabinet that is just inside the front door, where the original furnace sat. I all the interior doors, kitchen doors and drawers from a ’49 Imperial Mansion, and am using what I can in this Manor. Two of the wardrobe doors worked perfectly for our wardrobe, I’m very happy with how this turned out. The sink, a stainless double basin unit with built in drain board from IKEA, will be just aft of the wardrobe, and the fridge will set somewhere behind that, which will also determine where the partition for the bathroom will be.
I cut down a small pair of what had been overhead cupboard doors from the Mansion to use as upper doors. I’m pleased with how it all came together. It’ll looks original, but will be all modern and very functional for our needs.
About all I can do until the fridge is done and on hand now is to frame in the bed base in the back, and I can start cutting making cabinet doors, as I don’t have enough of the correct size to re-use from the Mansion, and originals from this trailer are trashed.
In other news, the Traveleze trailer I bought a couple weeks ago has a new home, Mike Greene bought it and is going to restore it for his family to use. I had a small mishap with it, got stuck in the snow trying to back it in the barn at my dad’s to keep it out of the weather. I could only back up, the truck kept sliding a bit sideways, and I ended up backing it into a small tree at the edge of the drive. This wouldn’t have hurt it a bit, but it turned out the wood framing at the rear of the trailer was completely rotted away, and the siding buckled, revealing the beginnings of a black hole where the trailers framing should have been. This was demoralizing, I’d hoped to use it as is, and with the Spartan project, and the three car projects now on hold until that gets done, I just didn’t want to fix it. Mike didn’t care, planned on a complete rebuild of whatever trailer he found, so we cut a deal, he came and got it yesterday. Everybody’s happy!
That’s Mike, happily changing wheels and tires for the trip to Bristol, Indiana!