Posts Tagged ‘roadster’

35330169_10217258422435238_3812151639796613120_n

It’s always good to lead with a pun, right?  The past month has been a whirlwind of activity, and life has gotten in the way, but finally I think I’m through the stress and have gotten back on the “fun” stuff.

The wagon, which you’ll remember I’d gotten the rust repairs done over a month ago, has been stalled.  We missed my (seemingly easy) deadline of having it ready for the Milford TCT Spring Rally (vintage trailer gathering), and the Muskegon rally last weekend, but today I finally got primer on it.  I’d thought I’d be shooting primer Monday, but found a soft spot on the drivers front fender, down low, behind the rocker molding,  made a patch for that, got the body work finished this morning and 4 double wet coats of high-build primer on this afternoon.

I’m happy with how it looks, although I discovered some pinholes in the filler on both sides, something I’ve never had happen before.  I bought high end, expensive finish filler, so maybe I’m better with the cheap stuff!  It’ll mean a skim coat of some polyester finish putty, but I have to block it all out, prime again, and then a guide coat, so it’s really no big deal.

I think the skirts are killer.

35427463_10217258421555216_3999703983915532288_n

35329054_10217258420995202_280084648552300544_n

In other news, we’ve given up on the  period correct Frigidaire fridge in the Spartan trailer, it just doesn’t get cold and stay cold.  We had it converted to propane, and it’s never done a good job.  Well, it’s cold as long as the ambient temps are below 70, but seldom can we rely on that in the midwest in summer, so, it’s going away.  In it’s place, will go an early 50’s GE fridge, that we’ll keep electric only, with it’s original compressor.  I bought it here in Kalamazoo from a nice hot rodder guy who follows me on Instagram.  Plugged it in when we unloaded it and in 2 hours the cabinet temp was 20.5!  I had it cranked WAY up, so I dialed the thermostat down, and it’s humming along a 34 right now.

New gaskets are on the way for the door, and I’ll fix some minor damage to the door tomorrow and get it ready for a new coat of shiny white enamel from Tractor Supply that I have on hand.  I put a 2000 watt inverter in the trailer last fall, so we can run it on the battery (the inverter converts 12V to 110V) while towing and the car or truck alternator will keep the battery charged.  A solar charger and one more coach battery would enable us to go entirely solar and still have the fridge, although we couldn’t use the AC.  It’s going to be a HUGE improvement.

35078161_10217230714222550_3402577210488389632_n

The ’34 has been running great, I’ve put about 700 miles on it, enough to have the cheap reproduction Harley speedometer (junk to begin with) stop working, the old SW vacuum gauge to stop working (hole in the diaphragm), and tonight, the brake lights to not work.  I also discovered the play in the steering, which I’d blamed on the cheap, reproduction Vega steering box, but turned to be the cheap, off-shore made pitman arm which was slightly thinner than the box was made to use.  That meant the nut didn’t tighten the arm down on the shaft completely, leaving some “slop” between the steering box shaft and steering arm.  Scary.

I “fixed” that with a couple of flat washers that were in the bolt bin, and the car drives like a slot car  now.  I’ll keep my on that Vega box, they have a reputation for being sloppy and wearing quickly, but for now, it seems like it’s all good.  There are always some bugs to work out, but overall, it’s great.

35194243_10217241163683780_1157477335331504128_n

34789946_10217187387619412_7001465453247725568_n

31515157_10216904840355907_1331154379194565790_n

31949757_10216961009920111_5340382466358116352_n

Our son Craig and his wife Kathleen bought a ’65 Ford Ranch wagon earlier this  spring, and I helped them wire it for a trailer lights, installed a brake controller, fixed the power steering pump and put a new high performance radiator and new hoses in ahead of the sweet running 352.  It looks pretty nice as is, I’ll do a little rust repair this winter for them on the rear fenders and rocker panels, and blend the paint.  It’s got a pretty decent “used car lot” repaint from decades ago that polished up pretty well, and they want the car to be a funky, driver type car, so that makes it easy for me.

We gave them the little “Tini-Home” canned ham trailer, they’ve already used it once, we hope it’ll give them years of family fun, just like it has for us!

So, lots of activity here a Cool McCool’s Garage.  We’ve been to a couple of cruise nights with the roadster, and a weekend of vintage camping with our friends at Hoffmaster State Park in Muskegon.  June is half over, but summer has just begun!

 

27858557_10216240459586803_3952936189920213161_n

I’m “done” enough at this point to call it good, at least to take it to Detroit for the “AutoRama” in two weeks.  The interior is indeed finished, with the exception of hooking up the turn signal indicator light in the dash, and a couple of screws in the carpet to hold it in place.

You can see the black knobs for the safety latches.  Those were ordered from Summit a day and half a go.  Super fast shipping, and they’re pretty nice quality, certainly nicer than the barrel bolts I had bought at the hardware store…

27867397_10216240460106816_4347238288699030027_n

Yesterday I had cut and bound the carpeting, which is just an indoor/outdoor area rug I ordered from Home Depot.  It’s all synthetic, no backer, and I used bubble wrap “Reflectix” insulation rather than jute padding under it.  It should be very forgiving weatherize, and the chocolate color compliments the saddle interior.  And, it was $18.00.

Winning.

27752009_10216240690832584_264322075344497230_n

28166655_10216240690592578_1439144216708945599_n

In addition to the upholstery, I re-chromed (again) the rusty but repaired windshield frame, and got that installed, complete with the newly cut down glass.  I’m not particularly happy with the gasket, it’s so loose in the slot in the frame that I had to glue it in with some silicone, but it seems to be staying put.  I trimmed a little against the posts so the windshield frame snuggles right in between the posts perfectly.

From Home Depot I also bought a 4×8 sheet of white “FRP” plastic to make the trunk panels from, if I have time next week I’ll get the trunk upholstered and carpeted too, but if I don’t get to it, we’ll leave the trunk closed.  It’ll be a nice bonus if it’s done (I’m sure I will), but it’s not a priority at this point.

The big decision at this time is how best to title and register the car.  I like to title it as a ’34 Ford, but the cost of a title may be a factor.  Otherwise, an “Assembled” title would work, I’d have to put temporary bumpers and windshield wipers/washer on for that, so we’ll see.

See  you in Detroit in two weeks!

 

BRRRRRRR….

Posted: January 5, 2018 in Hot Rod, Uncategorized
Tags: , , ,

26219386_10215859408700769_1158416836004389838_n

It’s a relatively balmy 8.5 degrees F here today, which may seem cold to my warm weather friends, but if we keep in mind thats 3 X as warm as it was last night when I came in from the shop, it seems better.  The shop air temp warmed up pretty quickly to 50 degrees, but the floor, the tools, equipment and 4 cars remained a chilly 20 something, which made working not very pleasant, although it was acceptable with a sweatshirt and insulated boots.

Anyway, I got the headlights DONE!  I’m happy, and slightly impressed, with the job I did on the wiring harness.  Everything worked first time, the lights are very bright, the turn signals work (amazing), and I really like the amber glow of the park lights and turn signals.

26219377_10215859408380761_667256176436553198_n

The headlights are ’36 Chevy commercial housings, I added a base for Halogen bulbs, and a socket for 1157 park/turn bulbs.  The silvering on the reflectors polished up beautifully with a bit of Wrights Silver Cream, and the hole I initially drilled in the bottom of the left light was easily fixed with a stip of Gorilla tape to the rear, and a small circle of HVAC aluminum tape on the sticky side of the Gorilla tape in the hole.  Invisible behind the lens.  Which very proudly proclaims “Chevrolet” at the top, and “Tilt-Ray” on the bottom.

Just a little hint as to what lurks under the hood.

I’ve been forced to upgrade my WordPress account to accommodate more memory, so, as a Christmas present to myself, I splurged and added more memory, more features I don’t fully comprehend, so you, faithful reader, can suffer along with me and all the shenanigans here at Cool McCool’s Garage!

Here’s the latest video of the Roadster NOT shucking the fan belt at WOT (a study in frustration trying to determine the correct size belt, then the challenge of actually finding one in stock somewhere).  In addition, I ordered a pair of rear wheel cylinders, a new Stewart Warner mechanical temp gauge in the correct 2 5/8″ diameter to replace the one I tried to rebuild using a cheap gauge as donor, and a speedometer cable.  I ordered them at 4 pm on the 22nd, they were delivered at 2 pm the 23rd!  That’s excellent service, and the cylinders are Raybestos, made in USA, at the astoundingly low price of $5.97 each!  Free shipping too, props to Summit Racing!

We’re relaxing in front of the tree, our presents to each other are opened, we basking in the glow of the fire (and a couple of Mimosas), so  to all our friends, Happy Holidays, and thanks for reading and following along!  Stay tuned for lots more fun this next year, and look for new stuff here with all the widgets, features and improvements at the site!

It’s Alive!

Posted: December 16, 2017 in Hot Rod, transportation
Tags: ,

​What I did yesterday…

Winter Wonderland.

Posted: December 7, 2017 in Hot Rod, transportation
Tags: , ,


Here at Cool McCool’s Garage, the first snow has fallen, but it’s toasty warm inside the shop.  

I’m busy getting the ’34 Roadster wiring harness made.  I’d salvaged miles of 12 and 14 gauge wire from the ill- advised motorhome project, and an equal amount of black plast loom.  Not period correct I know, but it’s all going to be hidden up under the dash, behind upholstery panels or in the frame.  



I’ve got the engine ignition, starting and charging circuits done, so in theory, it should start now and run, but I haven’t tried yet.   I’ll finish the complete harness before I fire it, I still need a ground cable and make ground connections for the engine and steel body bracing.  Obviously the wiring has to be tidied up and tucked in the looms yet, but it’ll look good completed, and should keep all the magic smoke inside the wires.

23915926_10215552222861315_2855824909208211346_n

 

Wisdom from my buddy Jake Moomey.  He’s right.   The stance on this car is perfect, the result of a flattened (almost too much) ’40 Ford rear crossmember, and ’49 mono leaf rear spring,  a flattened stock front crossmember, a 4″ dropped axle, and a Posies “Superslide” reversed eye “Super Low” spring up front.  The frame rails are notched front and rear, and it’ll probably settle an inch after being driven.

Then, it’ll be perfect.

For those who don’t care for the  Dayton rim laced wire knock off’s, I have this to say…

24130040_10215552213941092_6352111787536151187_n

 

Too bad.  In addition this set of 14″ slots and G7814 Bias Belts, I have a set of 15″ ’49 Chevy wheels with stock hub caps (the car has a 283, and ’36 Chevy headlights, the BowTie is fine), some 8.00×15’s for the back and 7.20×15’s for the front.  That should make the “purists” happy, not that care.  I plan on running the wires most of the time.

24131482_10215552202420804_1086177782074156802_n

 

I’ve gotten started on the wiring, the battery is mounted in the trunk and the cables are run to the starter, and I”

I’ve sorted the wiring out in the ’61 T’Bird steering column, figured out which wires are for the neutral safety switch, turn signals and back up switches, so that much is done.  Before too long I should be able to fire the thing up and hear the 283 through the open headers.  The brakes need to be bled, so after those two tasks are complete, it’ll be a runner.

I’m trying now to find material that matches the seat upholstery.  I’ve gotten one sample from about 10 that is close, which may be close enough, since the seating surface and bolsters of the seat don’t match anyway.  It may be fine on the door panels, kick panels and top well, certainly close enough for the trunk.  Top color is still undecided, it’s either black/tan or tan/tan.  I’ll decide when I order the material.

I’m really happy with how it looks on the ground, it’s been setting on jack stands for months.  This is the first time it’s been on it’s wheels on the ground since paint, so this is another big step forward.